Multi-leg chain sling
T(8)single-leg chain sling
| Standard | GB/T20652-2006,EN818-2 |  |
| Safety ratio | 4 times | |
| Application range | Lifting | |
| Material | High quality alloy containing Cr, Ni, Mo | |
| Surface treatment | Oiled, blackening, hot dip galvanized, electrogalvanized, carburization, olishing |
|
Model |
Diemeter (d)mm |
WLL (T) |
Master Link (A*B*D) |
Weight(Kg/M) |
|
DL8-6 |
6 |
1.1 |
60*110*13 |
0.79 |
|
DL8-8 |
8 |
2 |
60*110*16 |
1.38 |
|
DL8-10 |
10 |
3.15 |
75*135*18 |
2.2 |
|
DL8-13 |
13 |
5.3 |
100*180*25 |
3.8 |
|
DL8-16 |
16 |
8 |
100*180*25 |
5.63 |
|
DL8-20 |
20 |
12.5 |
110*200*32 |
8.6 |
|
DL8-22 |
22 |
15 |
140*260*35 |
10.2 |
|
DL8-26 |
26 |
21.2 |
180*340*45 |
12.78 |
|
DL8-32 |
32 |
31.5 |
190*350*50 |
22.29 |
T(8) double- leg chain sling
| Standard | GB/T20652-2006,EN818-2 |  |
| Safety ratio | 4 times | |
| Application range | Lifting | |
| Surface treatment | Oiled, blackening, hot dip galvanized, electrogalvanized, carburization, olishing | |
| Note | The rated load capacity will reduce to 20% when the hook go through the chain |
|
Model |
Diameter (d)mm |
WLL(T) |
Master link |
Weight(Kg/M) |
|
|
α≤45 |
45<α≤60 |
A*B*D |
|||
|
DL8(2)-6 |
6 |
1.568 |
1.12 |
60*110*13 |
0.79 |
|
DL8(2)-8 |
8 |
2.8 |
2 |
75*135*18 |
1.38 |
|
DL8(2)-10 |
10 |
4.41 |
3.15 |
90*160*22 |
2.2 |
|
DL8(2)-13 |
13 |
7.42 |
5.3 |
100*180*26 |
3.8 |
|
DL8(2)-16 |
16 |
10.92 |
7.8 |
110*200*32 |
5.63 |
|
DL8(2)-20 |
20 |
15.68 |
11.2 |
160*300*40 |
8.6 |
|
DL8(2)-22 |
22 |
21 |
15 |
180*340*45 |
10.2 |
|
DL8(2)-26 |
26 |
29.6 |
21.2 |
190*350*50 |
14.87 |
|
DL8(2)-32 |
32 |
44.1 |
31.5 |
200*400*60 |
22.29 |
T(8) Four –leg chain sling
| Standard | GB/T20652-2006 |  |
| Safety ratio | 4 times | |
| Surface treatment | Oiled, blackening, hot dip galvanized, electrogalvanized, carburization, polishing | |
| Symmetric lifting ,evenly distributed load | ||
|
Model |
Diameter (d)mm |
WLL(T) |
Master link |
Weight(Kg/M) |
|
|
α≤45 |
45<α≤60 |
A*B*D |
|||
|
DL8(4)-6 |
6 |
2.35 |
1.68 |
75*135*18 |
0.79 |
|
DL8(4)-8 |
8 |
4.2 |
3 |
90*160*22 |
1.38 |
|
DL8(4)-10 |
10 |
6.61 |
4.72 |
100*190*28 |
2.2 |
|
DL8(4)-13 |
13 |
11.13 |
7.95 |
110*200*32 |
3.8 |
|
DL8(4)-16 |
16 |
16.38 |
11.7 |
140*260*35 |
5.63 |
|
DL8(4)-20 |
20 |
23.52 |
16.8 |
190*350*50 |
8.6 |
|
DL8(4)-22 |
22 |
31.5 |
22.5 |
190*350*50 |
10.2 |
|
DL8(4)-26 |
26 |
44.5 |
31.8 |
200*400*60 |
14 |
|
DL8(4)-32 |
32 |
66.15 |
47.25 |
250*460*7 |
22.29 |
Application
Can hold such as: the tube, pipe, oval pipe, rectangular pipe, H-beam, I-beam, container and other big constructure. The device is widely used in various kind of pipes profile processing field, shipbuilding industry, network structure, steel, marine engineering, oil pipelines and other industries.
Attention
It is necessary not only to avoid damage to lifting items, but also to prevent damage to the sling.Avoiding spinning or falling, the following conditions should be observed:
A) Single-leg :the lifting point shall be vertically above the center of gravity of the lifting item.
B) In the case of double leg, the lifting point should be located on both sides of the lifting object and above the center of gravity.