Pressed wire rope sling

Pressed Flemish Eye Galvanized Wire Rope

Pressed wire rope sling with multiple legs

 classcification　:　
1. Press one end or both ends into a circular ring.

2. Rigging with single, double, three, four or more limbs can be made according to requirements

Application :

Suitable for transformer, shipbuilding and special machinery and a variety of environment in large lifting special requirements.The minimum breaking force of wire rope without joint is 6 times of the working load.

Note :

In ordering a wire rope sling be sure to give complete information including length,diameter,construction,lay,core.

Length:state the exact length desired.In ordering end fittings such as thimbles,links or hooks spliced in,give exact length from bearing to bearing or end rope,or submit a sketch with dimensions.

Diameter:the true diameter of a wire rope is the diameter of a circle which will enclose it.In using the caliper to determine the diameter,be careful to avoid measuring across the adjacent strands.

Construction:advice whether 6X19,6X37,7X19 or other.

Lay:state definitely whether regular(right hanad or left hand).or lang lay(right hanad or left hand)is required;if it is uncertain,consult with us.Standard practice is to furnish Right Hand Regular(ordinary)Lay.But if left hand Regular(ordinary)Lay is required for cable tool drilling or some other purpose,be sure to state.

Core:indicate whether fiber core(FC)or independent wire rope core is desired.