Gostern Wire rope rigging /Chain rigging /Lifting rigging


Featured products

Steel slab clamp billet lifting clamp The tong equipment for transporting billets is designed with the advanced experience from home and abroad on the basis of our production experiences for many years with the advantage of no power consumption, no electromagnetic wave interference, reliable&safe in operation and flexible adaptability. Facts have proved that this lifting tool […]
The wire rope sling used for landing shall be inspected periodically, paying particular attention to the area through the pulley, and shall be renewed if necessary due to wear and tear of the sling or at intervals not exceeding 5 years (whichever comes earlier). 
The galvanized steel turnbuckles is a rigging accessory that links the load bearing function.
Open Type Casting Socket Steel Wire Rope Sling for Marine Towing with Customized Services. Galvanized Us Type G416 Grooved Open Type Spelter Socket
Use on link chain, connecting with chain and composed of lin chain sling.
Application: Ship, iron and steel industry, petroleum chemical industry, coal mine

C type billet lifting clamp /Tong

C-type lifter is used for horizontal lifting of steel coil. First, it looks like a letter C from its appearance, so it is called C-type spreader. It is mainly used in steel mills, cold rolling sheet production and processing enterprises, storage and transportation warehouses and other workplaces where horizontal steel coil is used. 

C type spindles are mainly composed of lifting concrete and counterweight iron from the point of view of structure. The main part is made of alloy steel and steel pipe splicing, and the cross section is box structure. The counterweight iron plays the role of adjusting the balance of the spitzer, so that the center of gravity of the spitzer and the object to be hung is in a line. C-type spreader adopts high-density reinforcement plate, embedded reinforcement lug, multi-layer anti-rust treatment for finished spreader, precise size of CNC cutting,

C-type spenders are mainly used for lifting steel coils, aluminum coils, copper coils, wire coils and other coils. Type C spindles are divided into single plate type for inlet slot, work type, box type and cylindrical type for wire hoisting.

C-type spreader can add protective measures, such as rubber, nylon board, aluminum board, polyurethane, rubber pad, etc. at the contact position between spreader and the object to protect the object from damage according to user’s requirements.

The loads of type C spenders are 5 tons, 10 tons, 15 tons, 20 tons, 25 tons, 30 tons, 35 tons, 40 tons, etc. According to the actual situation of the site, the user can provide the width, inner diameter, outer diameter, ambient temperature and field use conditions and other parameters.

After use, c-type spreader should be placed on a special shelf and stored in a ventilated, dry and clean workshop. The surface should be regularly protected against rust, not allowed to be stored in acid, alkali, salt, chemical gas and damp environment; Clean lubricating oil on rotating parts regularly to prevent dry friction and blockage.

Leave Your Message